Your task: know which weight your carrier will charge for each packed parcel. Measure the outer dimensions, work out volumetric weight with your carrier’s conversion factor and compare it with the scale weight. The greater of the two is usually the chargeable weight. Large, light parcels are where the difference matters most.
Use the volumetric weight calculator with your own measurements and your carrier’s current factor. This guide contains no carrier rates. Any factor quoted here is an example to check, not a substitute for your account terms.
Why carriers use volumetric weight
A delivery vehicle fills up by space as well as weight. Carriers therefore convert a parcel’s size into an equivalent weight and charge for whichever is greater. A pillow and a small box of bolts can weigh the same but occupy very different amounts of space.
New Zealand carriers state the rule in their own terms. NZ Post’s sending standards say the greater of the actual or volumetric weight is used to determine the number of parcel tickets required, and that under-ticketed parcels are charged the difference. Aramex New Zealand’s glossary says pricing is based on the greater of actual and cubic weight. NZ Couriers’ help article describes charges based on whichever of the two is greater. Factors, limits and rounding can differ, so check the current terms for your own service.
Measure the parcel you actually send
Measure the outside of the packed parcel: length, width and height at the widest points, including any bulge from padding or an overfilled satchel. Weigh it with all its packaging. A product’s catalogue dimensions describe the item, not the parcel the carrier handles.
Measure in centimetres and record which packaging you used, so the measurement can be repeated. For a product family, measure one example of each packaging option.
Apply the conversion factor
Carriers express the same idea in two ways:
- Kilograms per cubic metre. Convert the dimensions to metres, multiply them together and multiply by the factor. When checked on 16 October 2026, Aramex New Zealand’s glossary described cubic weight as volume in cubic metres multiplied by 200.
- A divisor. Multiply the dimensions in centimetres and divide by the carrier’s divisor, in cubic centimetres per kilogram.
The two forms are equivalent: a divisor equals 1,000,000 divided by the kilograms-per-cubic-metre factor. A factor of 200 kg per m³ matches a divisor of 5,000.
Illustrative parcel: a 40 × 30 × 20 cm box weighs 2.4 kg packed. Its volume is 0.4 × 0.3 × 0.2 = 0.024 m³. At an illustrative factor of 200 kg per m³, volumetric weight is 0.024 × 200 = 4.8 kg. The chargeable weight is the greater figure, 4.8 kg, twice the scale weight.
Some carriers then round the chargeable weight up to a set step. Enter that step in the calculator if your terms specify one.
Test smaller packaging
Volumetric weight rises with every dimension, so modest packaging changes can have a large effect. The table keeps the illustrative factor and assumes the packed weight stays at 2.4 kg.
| Illustrative box | Volume | Volumetric weight at 200 kg/m³ | Chargeable weight |
|---|---|---|---|
| 40 × 30 × 20 cm | 0.024 m³ | 4.8 kg | 4.8 kg |
| 35 × 25 × 15 cm | 0.013125 m³ | 2.625 kg | 2.625 kg |
| 30 × 25 × 12 cm | 0.009 m³ | 1.8 kg | 2.4 kg |
In the smallest box, actual weight sets the charge, so shrinking the box further would not reduce the chargeable weight. Protection still comes first: a smaller box that leads to damage costs more than it saves. Check your carrier’s packaging requirements and the product’s needs before changing.
Bring the result into pricing
Use the chargeable weight to obtain an actual quote, then enter the delivery cost in the order contribution calculator or the selling price calculator. Shipping charged to customers and delivery paid by you remain separate figures.
When comparing services, calculate chargeable weight for each carrier with its own factor; one carrier’s figure does not apply to another. Follow comparing delivery services using your own order mix to weight the results by the parcels you really send.
Know the limits
The calculation assumes a rectangular parcel. Tubes, cylinders and irregular items may be measured differently, and carriers set maximum sizes and weights for each service; NZ Post’s sending standards, for example, list maximum size, length and weight restrictions for domestic parcels. A calculated figure is an estimate. Your carrier’s measurement and rate card decide the charge.
Your next step is to measure and weigh three representative packed parcels, calculate their chargeable weight with your carrier’s factor and note which packaging change, if any, would reduce it. Add the measurement step to your packing and dispatch checklist.
Sources & reference dates
- Complying with our sending standardsNZ Post · accessed 16 October 2026
- Cubic weightAramex New Zealand · accessed 16 October 2026
- What is volumetric weightNZ Couriers · accessed 16 October 2026
Spot something that needs correcting? Send a correction. See our editorial policy and commercial disclosures.